| SA169 -
Walking Foot for Vertical Bobbin Machines |
| The walking foot is a moving feed system
that holds and moves fabric between the presser foot's upper
feed dog and the machines' lower feed dogs to better
control difficult fabrics. The walking foot is great for
quilting, sewing when matching prints or plaids or fabric
drift is an issue . The Walking Foot is not for use in
reverse sewing.
 |
|
|
| SA162 -
Pin Tuck Foot Vertical |
| The pin tuck foot, in combination with a
twin needle, helps you to make perfect pin tucks as well as
to sew corded pin tucks on shirts, blouses and many home
decorating projects |
see image
|
| SA161 -
Adjustable Zipper & Piping Foot |
| Similar to the “I” foot that is included in
many of our machines This foot offers more complete
adjustability. The distance that the zipper is from the
needle is adjustable in the foot, not just the needle
position making this foot a must for serious sewists. Screw
on foot - requires low shank adaptor on sewing/embroidery
model machines. |
see image
|
| SA156 -
Vertical Load Bobbin (10 PACK) |
| Bobbin Set (10 Pack) |
see image
|
| SA149 -
Picot Foot |
| Picot foot This foot looks similar to the
narrow hemmer feet, but is designed to create a shell-look
edge on lightweight fabrics. The groove under the foot is
thinner and deeper than the narrow hemmer feet for creating
a roll at the fabric edge as the machine feeds. |
see image
|
|
back to
top |
| SA148 -
Cording Foot (5mm) |
| Used for embellishing with 1-3 cords. Cords
or yarn are held by a clip on the top of the foot. Simply
insert cords under the clip and stitch down using a
serpentine zig zag or other decorative stitch. Great for
couching! . Similar in use to SA157 & SA158 However, the
cords are placed under a clip on the top of the foot and
accomodates slightly thicker cords. Perfect for couching! |
see image
|
| SA146 -
Open Toe Vertical |
| The Open Toe Foot is used with any
application where extra visibility is desired. Uses include
sewing where visibility is important such as seams with
markings or curves, pattern markings, or applique stitching
as well as for ease in embellishment. |
see image
|
| SA144 -
Clear View Vertical |
| Clear-view foot is used with any application
where visibility of seams or pattern markings are desired
for ease in embellishment as the foot is clear plastic. |
see image
|
| SA142 -
Fringe Foot |
| Creates dimensional thread loops on the top
surface of the fabric. |
see image
|
| SA135 -
Overlock Foot Vertical |
| The Overlock Foot is used for sewing
overcast seams and protect edges from fraying. Use the
overcast stitches in your machine and see what a difference
this foot makes in their appearance and functionality! |
see image
|
|
back to
top |
| SA141 -
Braiding Foot |
| The adjustable guide on this foot offers
perfectly centered hands free placement of cords, ribbon,
braiding, or tape up to 5mm in width. |
see image
|
| SA134 -
Blind Stitch Vertical |
| Adjustable for creating blind hems on a
variety of fabrics While designed for blind stitching, the
foot works well for edge stitching, lace and fabric edge
joining. |
see image
|
| SA132 -
Quilt Guide |
| The adjustable guide can be used
to sew parallel rows at preset even intervals. Slide
straight bar into the hole of the presser foot ankle or
walking foot (equipped with a mounting hole). The distance
from the needle may be adjusted by sliding the guide from
left to right.. |
see image
|
| SA128 -
Concealed Zipper/Fastener |
| Zipper/Concealed Fastener Foot (Snap on
Foot) For easy installation of concealed zippers. |
see image
|
| SA125 -
1/4" Quilting Foot |
| For quilt and patchwork piecing with 1/4" or
1/8" seam allowances. Using the center needle, straight
stitch position, the right front edge of this foot provides
a guide for creating even ¼-inch seams for quilts, doll
clothes and heirloom sewing projects. When using the left
side of the foot as a guide, an 1/8-inch seam is created. |
see image
|
|
back to
top |
| SA122 -
Non-Stick Vertical |
| Non-stick foot glides over difficult fabric
surfaces with ease improving stitch quality in many problem
fabrics. Some fabrics may bind under metal feet often
causing problems in consistant feed resulting in poor stitch
quality. The non stick foot overcomes problems with fabric
such as loop and hook tapes, leather, and vinyl. Similar to
standard J and Clear-view feet. |
see image
|
| SA120 -
Gathering Foot |
| The Gathering Foot can be used for lightly
gathering fabric as well as attaching the gathered edge to a
flat (ungathered) fabric, at the same time quickly and
easily. The gathering foot will allow the sewer to gently
ease or slightly gather fabric for various garment and home
decorating applications. |
see image
|
| SA109 -
Binder Foot |
| Binder foot (SA109) Used to attach bias tape
less than 7mm (finished) in width. The design of this foot
places your ready made bias tape or will fold and place
precut bias strips correctly for easy sewing to the edge of
a fabric. |
see image
|
| SA108 -
Straight Stitch |
| The design of this foot improves contact
with the feed dogs resulting in more accurate and consistant
feed which creates a higher quality straight stitch. Also
used for straight stitch applications using fine or lighter
weight fabrics where a wide center foot opening might cause
the fabric to be pulled into the bobbin area. |
see image
|
NO Shipping
Fees 
